Description

Cuboid 3TX is a full range, two way, passive 3” loudspeaker designed to give exceptional sound quality in a very small form factor, for distributed applications with high quality background music and speech reproduction.

With its attractive design and included mounting hardware, Cuboid 3TX can be fixed in either portrait or landscape orientation for simple and flexible installation. A weatherproof terminal cover is available for outdoor use, bringing the rating to IP54.

Cuboid 3TX features a 3.5” low frequency driver and a 0.5” PEI dome high frequency driver mated to a shallow wave guide for consistent HF distribution.

 

Each Cuboid 3TX can be run on a series of 70 or 100V taps or at low impedance. Tap selection is via a rotary switch on the rear of the cabinet.

For enhanced bass performance, Cuboid 3TX can be teamed with Sub 10, and a SmartAmp or powered Zone will provide amplification, optimal sound settings as well as limiters to protect the drivers when playing at louder sound levels.

When coupled with Zone and WebApp, system set up and end user control is simple and intuitive, and can be further supplemented by ZonePad wall controllers.

 

Features

  • Discreet size, high performance
  • Portrait or landscape mounting options
  • Wall bracket included
  • Max SPL 98dB (continuous) 104dB (peak)
  • 130° horizontal x 120° vertical coverage
  • IP54 for outdoor use with accessory terminal cover
  • 8 ohm or 70/100V line operation

 

Specifications

TYPE Two-way, full range, passive 3” loudspeaker with transformer
FREQUENCY RESPONSE (with preset) 125Hz – 20kHz +/-3dB,
-10dB @ 80Hz
DRIVERS LF: 3.5”(90mm) coated paper, ferrite motor system.
HF: 0.5” (12.5mm) PEI Diaphragm neodymium
motor system
IP RATING IP54 when used with accessory terminal cover
RATED POWER 30 W (AES) 120W (peak)
NOMINAL IMPEDANCE 8 Ohms
SENSITIVITY (1W/1m) 84dB
MAXIMUM SPL 98dB (cont) 104dB (peak) @ 8Ω
CROSSOVER 3kHz
RECOMMENDED HIGH PASS FILTER 24dB Per Octave @ 80 Hz
TRANSFORMER TAPS @ 70v 2.5, 3.75, 5, 7.5W
TRANSFORMER TAPS @ 100v 5, 7.5, 10, 15W
DISPERSION (-6dB) 130°H x 120°V
ENCLOSURE ABS
FINISH Paint
PROTECTIVE GRILLE Painted Aluminium
CONNECTORS 4 pin Euroblock
PIN CONNECTIONS (INPUT) Positive and negative in with link out terminals
FITTINGS M4 mounting points for wall bracket
DIMENSIONS (W)120mm x (H)190mm x (D)118mm
(W)4.7” x (H)7.5” x (D)4.7”
WEIGHT 1.26kg (2.8lb)

 

 

Additional information
Brand

Optimal Audio

Color

White

Reviews (0)
Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.